Advanced Search

    column
    Influencing Factors of Resistivity Measurement for Thermoelectric Materials
    LI Hong-tao, LI Meng, ZHI Hui-bo, WU Yi-wen, WANG Biao, JI Cheng-chang, SU Tai-chao
    2014, 50(3): 161-164.
    Abstract PDF
    Cold Reduction Ratio and Annealing Temperature of 240 MPa Grade High Strength IF Steel
    ZHENG Guo-wei
    2014, 50(3): 165-168.
    Abstract PDF
    Influence of Artificial Aging on Microstructures and Properties of Plane Contact Type Cu/Al Terminal Connectors
    TANG Xiao-lei, CHEN Guo-hong, LIU Jun-jian, WANG Jia-qing, YUAN Feng, HE Tian-lei, ZHANG Tao, TANG Wen-ming
    2014, 50(3): 169-174.
    Abstract PDF
    Application of Instrumented Impact Test Results in Evaluating Ductility and Brittleness of SA508 Gr.3-Cl.2 Steel
    HUANG Xu-dong, YE Shi-liang, WANG Bin, XI Jian-fa, WANG De-tai
    2014, 50(3): 175-179.
    Abstract PDF
    Influence of Heat Treatment on Microstructure and Property of Welded Joint of 12Cr1MoV Steel Pipe
    CHEN Pin-tong, ZHANG Bo-zhi
    2014, 50(3): 180-183.
    Abstract PDF
    Testing Method for Anti-sliding Coefficient of High Strength Bolt
    SONG Xue-dong, CHENG Yong-quan
    2014, 50(3): 184-185.
    Abstract PDF
    Testing Equipment for High Temperature Elastic Modulus Based on Labview
    QIU Yi-fu, NIU Qin-zhou, QIU Yan, WEI Chen-guang
    2014, 50(3): 186-190.
    Abstract PDF
    Determination of Residual Stress in Nuclear Class Heat Exchange Tubes Based on Standard RCC-M
    HUANG Da-peng, LIU Hong-wei, KAN Yu-qi
    2014, 50(3): 191-193.
    Abstract PDF
    Uncertainty Evaluation on Average Intercept of Metal Grain Detected by Optical Microscope
    WANG Li-hui
    2014, 50(3): 194-196.
    Abstract PDF
    Reason Analysis on Unusual Fracture at the End of Tensile Specimen
    LI Jun-wei
    2014, 50(3): 197-198.
    Abstract PDF
    Uncertainty Evaluation on Measurement by MP30 Ferrite Content Detector
    YANG Li, LI Zhi-xia
    2014, 50(3): 199-200.
    Abstract PDF
    Discussion on Test Method for Carbon Content of Polyethylene in National Standard
    ZHOU Yan-ping, MENG Xiang-yan, WANG Xue-rong, WEI Li-ping, LIU Yun-chuan
    2014, 50(3): 201-203.
    Abstract PDF
    Graphite Classification and Inspection of Gray Cast Iron
    WU Xiao-ting, MA Xian-yin, YANG Ming-yue
    2014, 50(3): 204-208.
    Abstract PDF
    Basic Principle and Evaluation Method of Measurement Uncertainty and Evaluation Illustrations in Materials Detection Lecture 7Evaluation Illustrations of Measurement Uncertainty of Results in Detections of Materials
    WANG Cheng-zhong
    2014, 50(3): 209-215.
    Abstract PDF
    Analysis on Fracture Reason of Motor Shaft
    SUN Yu-hong, LI Tie-hu
    2014, 50(3): 216-218.
    Abstract PDF
    Analysis on Cracking Reason of Boiler Platen Reheater Tubes in Thermal Power Plant
    SUN Ming-cheng, LI Hong-qiang, ZHANG Yan-hong, ZHANG Guo-ling
    2014, 50(3): 219-222.
    Abstract PDF
    Analysis on Cracking Reason of Rolling Tube of Titanium Alloy TA10
    MA Hong-zheng, HUANG Zhang-hong, QU Heng-lei, HE Wei, NAN Li, YANG Ya-she, ZHU Kang-ping
    2014, 50(3): 223-226.
    Abstract PDF
    Fracture Analysis of Brake Bolts
    PANG Yuan, ZHANG Xiao-rong, CHEN Pei-lei
    2014, 50(3): 227-228.
    Abstract PDF
    Analysis on Quenching Cracks on Carburized Surface of Products Made by 20CrNiMo Steel
    LIU Yong-fei, WANG Ping-huai, DANG En, ZHANG Zhong-qi
    2014, 50(3): 229-231.
    Abstract PDF
    Analysis on Fracture Reason of Support Ring Plate
    TU Jian-guo, LI Xiao-ling
    2014, 50(3): 232-234.
    Abstract PDF