Advanced Search

    column
    Effect of different welding positions on microstructure and low temperature impact toughness of 9Ni steel weld
    LU Yadong, WU Guozheng, SHEN Jiaru, LIU Yue
    2025, 61(5): 1-5. DOI: 10.11973/lhjy-wl240088
    Abstract PDF
    Simulation test of oxide dot formation conditions of GCr15 bearing steel
    XU Shangcheng, LIU Guanghui, ZHOU Yang
    2025, 61(5): 6-9. DOI: 10.11973/lhjy-wl240173
    Abstract PDF
    Development of low manganese micro-niobium thick plate based on water cooling process after rolling
    LUO Longfei, LIU Weihang, WU Ronghua
    2025, 61(5): 10-13. DOI: 10.11973/lhjy-wl240063
    Abstract PDF
    Artificial intelligence research and application of steel grain size rating
    CHEN De, QI Biao, HU Qingmang, ZHOU Sanbao, LEI Huabei, GE Xiaobo
    2025, 61(5): 14-20. DOI: 10.11973/lhjy-wl240358
    Abstract PDF
    Equivalent test method for contact heat exchange coefficient of 5182 aluminum alloy sheet during hot rolling process
    WANG Junqiang, LIU Huachun, LI Qing, NIU Guanmei, ZHOU Baocheng, CAO Hailong
    2025, 61(5): 21-26. DOI: 10.11973/lhjy-wl240075
    Abstract PDF
    Static and dynamic CCT curves of SC700D steel
    LEI Na, ZHOU Zhichao, YANG Yanlong, QIU Yu, YANG Ye, SHAN Xianfei
    2025, 61(5): 27-32. DOI: 10.11973/lhjy-wl240072
    Abstract PDF
    Test method and standardization of shear bond strength of refractory slurry at room temperature
    ZHU Qingyou, YIN Yucheng, LI Yiwei, LIU Zhiqiang, XIA Zhongfeng, GE Shan
    2025, 61(5): 33-37. DOI: 10.11973/lhjy-wl250001
    Abstract PDF
    Determination of P-S-N curve of 6082-T651 aluminum alloy and its data processing method
    CAO Longtao, CAO Wenkai, MENG Tengyi, GONG Lanfang
    2025, 61(5): 38-43. DOI: 10.11973/lhjy-wl240081
    Abstract PDF
    Cracking reason of welded joint of steam header in cement plant
    GONG Guangping, MA Yuanwang, ZHANG Kai, ZHANG Kaibo, CHEN Chen
    2025, 61(5): 44-48. DOI: 10.11973/lhjy-wl240352
    Abstract PDF
    Causes of wire rope fracture in marine environment
    HU Wenxin, YANG Huiqi, LI Guangjin
    2025, 61(5): 49-52. DOI: 10.11973/lhjy-wl240349
    Abstract PDF
    Cracking reason of flange weld of heat exchanger cylinder
    HAN Daming, AN Hongliang, SUN Hongwei, HU Xihai, WANG Bo, HU Qingrui
    2025, 61(5): 53-56. DOI: 10.11973/lhjy-wl240276
    Abstract PDF
    Fracture reason of Q355B tower angle steel
    LI Jingrui, YU Yongwang, SHI Wei, YANG Li, YIN Hua, LIN Haiyan
    2025, 61(5): 57-61. DOI: 10.11973/lhjy-wl240117
    Abstract PDF
    Leakage reason of heat exchanger in natural gas purification device
    MA Xingyuan, ZHAO Jiaqi, SHANG Yonglan, ZHANG Jinlong, ZHANG Jianguang, LU Xuemei, CHEN Mengting
    2025, 61(5): 62-65. DOI: 10.11973/lhjy-wl240065
    Abstract PDF
    Corrosion perforation cause of sulfate reducing bacteria in 304 stainless steel storage tank
    XIONG Libin, MENG Ruoyu, LU Yao
    2025, 61(5): 66-68. DOI: 10.11973/lhjy-wl230378
    Abstract PDF
    Cracking reason of water wall tube of a supercritical boiler
    LU Zhongming, FENG Xiaoliang, LIU Kexiu
    2025, 61(5): 69-74. DOI: 10.11973/lhjy-wl240061
    Abstract PDF
    Fracture reason of 20CrMoA steel drive gear
    JIN Hui, YANG Qing, WANG Xiaoqin, LI Zheng
    2025, 61(5): 75-77. DOI: 10.11973/lhjy-wl240104
    Abstract PDF
    Cause analysis of typical brittle fracture of aviation parts
    WANG Qiang, LIN Wenqin, WANG Luzeng, ZENG Sixue, LI Junwen, DING Lizhao, WANG Yixing
    2025, 61(5): 78-82. DOI: 10.11973/lhjy-wl240312
    Abstract PDF
    Design of X-ray stress tester for engine blade detection
    LIU Yuanyuan, LI Xiaochen
    2025, 61(5): 83-86. DOI: 10.11973/lhjy-wl240062
    Abstract PDF