Advanced Search

    column
    Discussion on Practicability and Validity of Rockwell Hardness Test Standards of GB/T 230.1-2009 and GB/T 230.2-2012
    LI Heping
    2017, 53(8): 533-537,543. DOI: 10.11973/lhjy-wl201708001
    Abstract PDF
    Biaxial Tensile Testing of Cruciform Specimens
    XIAO Rui, LI Xiaoxing, LI Rongfeng, CHEN Yangkai, GE Yulong, YANG Yanfeng
    2017, 53(8): 538-543. DOI: 10.11973/lhjy-wl201708002
    Abstract PDF
    Characterization of Relationship between Grain Size and Hardness of Large-Size Deformation FGH96 Superalloy Turbine Disk
    LU Yuhua, WANG Peng, SHEN Xuejing, FU Rui, LI Fulin, LI Dongling, WANG Haizhou
    2017, 53(8): 544-547. DOI: 10.11973/lhjy-wl201708003
    Abstract PDF
    Comparative Analysis on GB and ASTM Standards for Tensile Property Test Method of Polymer Matrix Composite Materials
    NIU Yifan, GAO Sai, WANG Xiaorui
    2017, 53(8): 548-552. DOI: 10.11973/lhjy-wl201708004
    Abstract PDF
    Application of Statistical Hypothesis Testing in Quality Control on Tensile Testing of Metallic Materials at Room Temperature
    WEI Yuan
    2017, 53(8): 553-556. DOI: 10.11973/lhjy-wl201708005
    Abstract PDF
    Practicability of Portable Magnetic Brinell Hardness Tester in Hardness Test of Thin-Walled Small-Diameter Tubes
    ZHAO Yuan, LONG Huaming, YUE Gengxin
    2017, 53(8): 557-561. DOI: 10.11973/lhjy-wl201708006
    Abstract PDF
    Failure Analysis on Mechanical Equipments (Continued) Lecture 6 X-ray Diffraction Analysis Technique
    WANG Rong
    2017, 53(8): 562-572,598. DOI: 10.11973/lhjy-wl201708007
    Abstract PDF
    Performances of ϕ139.7 mm×7.72 mm J55 Low Pressure Gas-Tight Threaded Casing Joints
    LI Lingxia, DENG Xuyan, MU Zengli
    2017, 53(8): 573-576. DOI: 10.11973/lhjy-wl201708008
    Abstract PDF
    Trial Production Practice of IF Steel by Ferritic Rolling
    GAO Honggang, KANG Haijun, HAI Chao, LIU Minghui
    2017, 53(8): 577-579,589. DOI: 10.11973/lhjy-wl201708009
    Abstract PDF
    Structure Design and Motion Analysis of Joint Bearing Liner Friction Performance Testing Machine
    SUN Baorui, MA Wei, YANG Xiuguang
    2017, 53(8): 580-584. DOI: 10.11973/lhjy-wl201708010
    Abstract PDF
    Cause Analysis on Fracture of a Drill-Stem Sub
    BAI Qiang, MA Jianqiang, HAN Xinquan, LI Dejun, LIU Qiang
    2017, 53(8): 585-589. DOI: 10.11973/lhjy-wl201708011
    Abstract PDF
    Reason Analysis on End Cracking and Spalling of a 2510 Steel Plastic Mold Slider Block
    JIN Linkui, HUANG Chiwei, RUAN Yuhuang, OU Hailong, ZOU Wenqi
    2017, 53(8): 590-594. DOI: 10.11973/lhjy-wl201708012
    Abstract PDF
    Failure Analysis on Fracture of the Slide Plate of a Metro Turnout
    LI Eryong, WANG Jian, ZHANG Yiliang
    2017, 53(8): 595-598. DOI: 10.11973/lhjy-wl201708013
    Abstract PDF
    Reason Analysis on Fracture of Spring Steel Wires during Drawing
    PENG Xiaogang, CAO Biao, TAN Ying
    2017, 53(8): 599-602,606. DOI: 10.11973/lhjy-wl201708014
    Abstract PDF
    Reason Analysis on Leakage of the Internally Ribbed Tube in a Boiler Water Wall
    LIU Guangxing, GONG Wei, WANG Zhaomin
    2017, 53(8): 603-606. DOI: 10.11973/lhjy-wl201708015
    Abstract PDF
    Failure Analysis on Leakage of T91 Steel Reheater Tubes in a 350 MW Subcritical Power Unit
    LU Quan, SUN Li, LU Qiliang, CHEN Wei
    2017, 53(8): 607-610. DOI: 10.11973/lhjy-wl201708016
    Abstract PDF
    Cause Analysis on Flaking and Tooth Breaking of the Second Shaft Gear of a Shearer
    SU Le, WANG Peike
    2017, 53(8): 611-614. DOI: 10.11973/lhjy-wl201708017
    Abstract PDF