Advanced Search

    column
    XRD ANALYSIS OF MECHANICAL ZINC PLATING LAYER
    WANG Sheng-min, SHI Qing-nan, HE Ming-yi, ZHAO Xiao-jun
    2008, 44(4): 165-167.
    Abstract PDF
    DIFFUSION MECHANISM OF THE INTERFACE OF Al/Cu/Mg DIFFUSION COUPLE
    ZHEN Xi-cai, SONG Yu-qiang, LI Shi-chun
    2008, 44(4): 168-171.
    Abstract PDF
    RESEARCH OF STRUCTURAL PROPERTIES OF RE-DOPED ZnO THIN FILMS GROWN BY RF MAGNETRON SPUTTERING
    WEN Jun, CHEN Chang-le, PAN Feng
    2008, 44(4): 172-174.
    Abstract PDF
    ORIGINAL CRACK CHARACTER ON RAIL MIDDLE AFTER FLASH WELDING JOINT
    LI Da-dong, YU Teng-yi
    2008, 44(4): 175-179.
    Abstract PDF
    APPLICATION OF ULTRASONIC VELOCITY USED TO CHARACTERIZE THE PROPERTIES OF THE CERAMIC COATINGS
    LIN Li, LI Xi-meng, ZHAO Yang
    2008, 44(4): 180-183.
    Abstract PDF
    METALLOGRAPHIC IMAGE RECOGNITION BASED ON WAVELET DECOMPOSITION AND FRACTAL THEORY
    LEI Wei, TENG Qi-Zhi, TANG Tang
    2008, 44(4): 184-187.
    Abstract PDF
    COMPARISON OF MICRO-HARDNESS WITH NANO-INDENTATION HARDNESS IN HARDNESS MEASURING FOR MICRON LEVEL HARD COATING
    DU Jun, ZHANG Ping, ZHAO Jun-jun, CAI Zhi-hai, JIA Da-lei
    2008, 44(4): 189-192.
    Abstract PDF
    PROBABILITY STATISTICAL DISTRIBUTION AND TREATMENT OF IMPACT ENERGY FOR 10CrNi3MoV STEEL WELDED
    QU Zhan-yuan, LIU Gang, CHEN Qing-lei, ZHANG Jing-hai
    2008, 44(4): 193-192.
    Abstract PDF
    RING CORE METHOD AND X-RAY METHOD OF TESTING RESIDUAL STRESS OF LARGE STEAM TURBINE ROTOR
    ZHOU Xin-ling, ZHANG Xiao-wu, LI Xing-dong, ZHUAN Tong-xin
    2008, 44(4): 196-197.
    Abstract PDF
    APPLICATION OF MR-20 SIMULATE HEAT-TREATING FURNACE
    ZHANG Xian, MU Qing-hong
    2008, 44(4): 198-199.
    Abstract PDF
    EXPLOSION ANALYSIS OF LOW TEMPERATURE SUPERHEATER PIPE OF 130/3.81-MX BOILER
    LI Bai-cheng
    2008, 44(4): 200-202.
    Abstract PDF
    FRACTURE ANALYSIS OF OIL-SUCK-ROD USED OIL FIELD
    SHAN Chun-yan, LI Chun-fu, CHENG Li-zhang
    2008, 44(4): 203-205.
    Abstract PDF
    FRACTURE ANALYSIS OF 60Mn STEEL RING
    CHEN Gang, REN Xue-chong
    2008, 44(4): 206-208.
    Abstract PDF
    FRACTURE ANALYSIS OF PIN HOLE BOLT
    GUO Quan-ying, CAI Shu-fang, XU Shu-zhen
    2008, 44(4): 209-211.
    Abstract PDF
    RELATIVITY BETWEEN PREPARATION OF SPECIMENS AND RESULTS OF MECHANICAL PROPERTY TESTING FOR METALLIC MATERIALS——LECTURE No.2 THE CONCRETE REQUIREMENTS OF TEST STANDARDS FOR LOCATION OF SAMPLING OF MECHNICAL PROPERTY SPECIMENS (CONTINUED)
    WANG Cheng-zhong
    2008, 44(4): 212-214.
    Abstract PDF
    BASIC KNOWLEDGE OF SYNCHROTRON RADIATION——LECTURE No.2 DIFFRACTION TECHNIQUE AND ITS APPLICATIONS IN SYNCHROTRON RADIATION(Ⅱ)
    CHENG Guo-feng, YANG Chuan-zheng, HUANG Yue-hong
    2008, 44(4): 215-218.
    Abstract PDF