Page 35 - 理化检验-物理分册2023年第七期
P. 35

DOI : 10.11973 / lh jy -wl202307005


                   HRB600          级钢筋最大力总延伸率的测试方法及

                                                不确定度评定




                                                    吴 伟   1 , 2 , 郭跃华 1


                             ( 1. 攀钢集团研究院有限公司 钒钛资源综合利用国家重点实验室, 攀枝花 617000 ;

                                          2. 四川攀研检测技术有限公司, 攀枝花 617000 )
                    摘 要: 采用引伸计法与手工法对 HRB600级钢筋的最大力总延伸率进行测试, 分析了两种不
                 同的测试方法对测试结果的影响, 对手工法测试最大力总延伸率的不确定度进行了评定。结果表
                 明: 手工法测试最大力总延伸率的结果大于引伸计法测试最大力总延伸率的结果; 测试位置对手工
                 法的测试结果有较大的影响, 随着与断口的距离逐渐增大, 试样的最大力总延伸率逐渐变小; 当区
                 间的置信概率为95%时, 手工法测试最大力总延伸率的不确定度评定结果为4% 。

                    关键词: HRB600级钢筋; 最大力总延伸率; 引伸计法; 手工法; 不确定度

                    中图分类号: TB31   文献标志码: A   文章编号: 1001-4012 ( 2023 ) 07-0019-03

                    Testmethodanduncertaint y evaluationofthemaximumforcetotal

                                     elon g ationofHRB600 g radesteelbars

                                                         1 , 2
                                                   WU Wei , GUOYuehua 1

                ( 1.StateKe yLaborator y ofVanadiumandTitaniumResourcesCom p rehensiveUtilization , Pan g an gGrou pResearch

                                          InstituteCo. , Ltd. , Panzhihua617000 , China ;

                              2.SichuanPanYanIns p ectionTechnolo gyCo. , Ltd. , Panzhihua617000 , China )


                     Abstract : The maximum forcetotalelon g ation of HRB600 g rade steelbars wastested usin g the

                extensometermethodandthemanualmethod.Theim p actoftwodifferenttestin gmethodsonthetestresultswas

                anal y zed , theuncertaint y ofthemanualmethodfortestin g themaximumforcetotalelon g ationwasevaluated.The

                resultsshowthattheresultsofmanualtestin gformaximumforcetotalelon g ationwereg reaterthanthoseof

                extensometertestin gformaximumforcetotalelon g ation.Thetestin gp ositionhadasi g nificantim p actonthe

                testin g resultsofthemanualmethod.Asthedistancefromthefractureg raduall y increased , themaximumforce

                totalelon g ationofsam p leg raduall ydecreased.Whentheconfidencep robabilit yoftheintervalwas95% , the

                uncertaint y evaluationresultofthemanualmethodfortestin g themaximumforcetotalelon g ationwas4%.


                     Ke y words : HRB600 g radesteelbar ; maximum forcetotalelon g ation ; extensometer method ; manual

                 method ; uncertaint y
              最大力总延伸率是反映材料变形能力的重要参                             时, 应测试其最大力总延伸率。最大力总延伸率的
            数之一。 GB / T1499.2 — 2018 《 钢筋混凝土用钢 第               测试方法有两种, 分别是 GB / T228.1 — 2021 《 金属






            2部分: 热轧带肋钢筋》 中规定: 在测试钢筋的伸长                         材料 拉伸试验 第1部分: 室温试验方法》 规定的引


            率时, 可在断后伸长率和最大力总延伸率中任选其                            伸计法和 GB / T28900 — 2012 《 钢筋混凝土用钢材
            一进行测试, 当进行仲裁试验和测试部分牌号钢筋                            试验方法》 规定的手工法。笔者以 HRB600级钢筋
                                                               为例, 采用上述两种方法测试钢筋的最大力总延伸
                                                               率。不考虑热轧带肋钢筋自身因素对测试结果的影
                收稿日期: 2022-09-23
                作者简介: 吴 伟( 1985- ), 男, 工程师, 主要从事金属材料力学         响, 结合日常检测时的实际情况, 对两种方法测试最

            性能检测工作, wukun _ 00@sina.com
                                                                                                         1 9
   30   31   32   33   34   35   36   37   38   39   40