Page 31 - 理化检验-物理分册2021年第二期
P. 31

DOI : 10.11973 / lh jy -wl202102003

                     低成本船用                EH36        高强钢板的研制及其性能




                                                胡   战,   吴荣华,   陈继雄

                                             ( 宝钢湛江钢铁有限公司,湛江 524072 )
                    摘   要: 不添加价格昂贵的铌、 钒元素, 仅在 C-Mn 钢成分体系上添加钛元素细化晶粒, 采用热
                 机械控制工艺研制出低成本的船用 EH36 高强钢板, 并对其力学性能、 显微组织等进行了分析。结
                 果表明: 该船用 EH36 高强钢板成本较原来低, 其性能满足标准要求, 且强度和韧性均有较大的富
                 余量; 经人工应变时效后, 其低温冲击韧性仍较好; 经两种热输入焊接后, 其焊接接头的力学性能均
                 满足母材性能的要求, 且富余量较大, 说明其具有优越的焊接性能。
                    关键词: EH36 高强钢板; 力学性能; 应变时效; 焊接热输入; 焊接性能

                    中图分类号: TF769.2    文献标志码: A    文章编号: 1001-4012 ( 2021 ) 02-0013-04

                     Develo p mentofLowCostEH36Hi g hStren g thSteelPlateforShi p

                                                 andItsPro p erties


                                             HUZhan , WURon g hua , CHENJixion g

                                 ( BaosteelZhan j ian g IronandSteelCo. , Ltd. , Zhan j ian g524072 , China )


                     Abstract : Insteadofaddedex p ensiveNbandVelements , onl yaddedTielementtotheC-Mnsteeltorefinethe

                g rainsize , andlowcostEH36hi g hstren g thsteel p lateforshi pwasdevelo p edb y thermomechanicalcontrol p rocess , and

                itsmechanical p ro p ertiesandmicrostructurewereanal y zed.TheresultsshowthatthecostoftheEH36hi g hstren g thsteel

                p lateforshi pwaslowerthanthatoftheori g inal , its p ro p ertiesmetthere q uirementsofthestandard , anditsstren g thand

                tou g hnesshavealar g emar g in.Afterartificialstraina g in g , thelowtem p eratureim p acttou g hnesswasstill g ood.After

                twokindsofheatin p utweldin g , themechanical p ro p ertiesofthewelded j ointmetthere q uirementsofthebasemetal , and

                themar g inwaslar g e , whichshowthatithadsu p eriorweldabilit y .


                     Ke y words : EH36hi g hstren g thsteel p late ; mechanical p ro p ert y ; straina g in g ; weldin gheatin p ut ; weldin gp ro p ert y
               船用高强钢板用钢对性能要求较高, 需具有高                           较高的冷却速率下, 钢的强度和韧性均大幅度提高。
            强度和高韧性       [ 1 ] 。以前主要采用添加铌、 钒、 钛等元              基于热机械控制工艺的优点, 笔者尝试不添加铌、 钒
            素来细化晶粒以提高钢板性能。由于铌、 钒元素的                            元素, 只 添 加 钛 元 素, 以 热 机 械 控 制 工 艺 来 生 产

            价格较高, 以前船用高强钢板的生产成本也较高。                           EH36 高强钢板, 并对其性能及组织进行了研究。
                 近年来, 随着热机械控制工艺( TMCP ) 的发展,
                                                              1  试验方法
            大大降低了高强钢板的生产制造成本。在钢板的轧
            制工艺结束之后, 钢板进入快速冷却装置, 以较快的                         1.1  船用 EH36 高强钢板的主要性能要求
            冷却速率( 5~50 ℃ · s ) 冷却至贝氏体转变温度之                         船用 EH36 高强钢板的主要性能要求见表 1 。

                                -1
            下, 在快冷过程中, 发生奥氏体向贝氏体的转变, 在                                 表 1  船用 EH36 高强钢板的力学性能要求

                                                                  Tab 1 Mechanical p ro p ertiesre q uirementsofEH36hi g h

                                                                            stren g thsteel p lateforshi p
                收稿日期: 2020-11-23

                项目基金: 广东省促进经济高质量发展专项资金海洋经济发展                    屈服强度 / 抗拉强度 / 断后伸长率 /      冲击吸收能量( -40 ℃ )
            项目( GDOE [ 2019 ] A08 )                               MPa     MPa       %        纵向       横向
                作者简介: 胡 战( 1989- ), 男, 助理工程师, 主要从事中厚板产

                                                                 ≥355   490~630    ≥22       ≥31      ≥22
            品开发工作, huzhan@baosteel.com
                                                                                                         1 3
   26   27   28   29   30   31   32   33   34   35   36