Page 33 - 理化检验-物理分册2021年第一期
P. 33

DOI : 10.11973 / lh jy -wl202101004

                                                                 /
                                                                                  —
             对非金属夹杂物检验标准                                    GB T10561 2005                      的探讨


                                             刘桂江,程丽杰,谷   强,冯长伟




                                       ( 东北特钢集团 抚顺特殊钢股份有限公司,抚顺 113001 )

                    摘   要: 非金属夹杂物检验的国家标准修订在即, 为完善标准, 对 GB / T10561 — 2005 《 钢中非金
                 属夹杂物含量的测定———标准评级图显微检验法》 进行了详细研读, 并与旧版国家标准及相应的国
                 际标准进行了对比。结果表明: GB / T10561 — 2005 较旧版 GB / T10561 — 1989 更加完善, 其规定


                 了根据夹杂物的长度、 厚度、 直径、 颗粒数及分布对夹杂物进行评级, 方便试验人员的操作, 有利于

                 准确评价钢材的质量; GB / T10561 — 2005 在文本编辑、 原理公式、 实际检验规则、 结果表示、 图谱
                 制作等方面存在需要进一步完善之处。
                    关键词: 非金属夹杂物;检验;标准;原理公式;结果表示





                    中图分类号: TG115.21+3.3    文献标志码: A    文章编号: 1001-4012 ( 2021 ) 01-0015-04
                                                                                                  —
                                                                                      /

              DiscussiononNon-metallicInclusionIns p ectionStandardGB T10561 2005

                                      LIUGui j ian g CHENGLi j ie , GUQ ian g FENGChan g wei
                                                                     ,
                                                 ,

                           ( FushunS p ecialSteelCo. , Ltd. , Don g beiS p ecialSteelGrou p , Fushun113001 , China )


                     Abstract : Thenationalstandardofnon-metallicinclusionins p ectionwillberevisedsoon.Inordertoim p rove

                thestandard , the GB / T 10561 — 2005 Steel — Determinationofcontentofnonmetallicinclusions — Micro g ra p hic

                 methodusin g standard dia g rams was studied in detail , and com p ared with the old nationalstandard and

                corres p ondin g internationalstandards.TheresultsshowthatGB / T 10561 — 2005is morep erfectthantheold

                versionofGB / T10561 — 1989.Itsti p ulatesthattheinclusionshouldbe g radedaccordin g tothelen g th , thickness ,

                diameter , p articlenumberanddistributionofinclusions , whichisconvenientforthetest p ersonneltoo p erateandis

                conducivetotheaccurateevaluationofsteel q ualit y .GB / T10561 — 2005needstobefurtherim p rovedintheas p ects

                oftexteditin g , p rinci p leformula , actualins p ectionrules , resultex p ressionandatlasmakin g .


                     Ke y words : non-metallicinclusion ; ins p ection ; standard ; p rinci p leformula ; resultex p ression
               钢在冶炼、 浇注和冷凝过程中, 由于氧、 硫、 氮等                      《 钢中非金属夹杂物的检验 塔形发纹酸浸法》、 美国

            元素与钢液的冶金动态平衡会随着温度的降低而移                             的 ASTM E45 : 2018Standard Test Methodsf or





            动, 使其在钢中的溶解度减小, 导致氧、 硫、 氮的各种                      Determinin g theInclusionContento f Steel 、 德 国





            化合物的平衡常数相应增大, 因而形成各种非金属                            的   DIN    EN    10247 : 2007    Micro g ra p hic
            化合物, 即非金属夹杂物, 该类夹杂物通常是难以避                         Examination o f the Non-metallic Inclusion




            免的   [ 1 ] 。非金属夹杂物在钢中含量虽少, 但对钢的                   Contento fSteelsUsin gStandardPictures 、 日本的





            强度、 塑性、 断裂韧性、 切削性能、 疲劳性能、 热脆性                     JISG0555 : 2003Microsco p icTestin g Methodf or






            能以及耐腐蚀性能等都有影响               [ 2-5 ] , 因此, 夹杂物的
                                                              theNon-metallicInclusionsinSteel 等标准体 系,
            数量和分布被认为是评定钢材质量的一个 重要指                             但 GB / T10561-2005 《 钢中非金属夹杂物含量的

            标。对夹杂物的检验有低倍检验、 金相检验和扫描
                                                               测定 标 准 评 级 图 显 微 检 验 法》( 以 下 简 称 GB / T

            电镜分析等方法         [ 6 ] , 有国 内的 GB / T15711-2018    10561 — 2005 ) 是目前国内广泛使用的国家标准。随
                                                               着现代工程技术的发展,对钢的综合性能要求越来

                收稿日期: 2020-06-04
                                                               越严格, 钢材制造商与使用单位对标准的理解程度
                作者简介: 刘桂江( 1986- ), 男, 高级工程师, 主要从事钢铁材料

            轧制及检验工作, liu g ui j ian g fs@163.com               不一 致; 同 时 GB / T 10561-2005 等 同 采 用 ISO
                                                                                                         1 5
   28   29   30   31   32   33   34   35   36   37   38