Page 16 - 理化检验-物理分册2023年第六期
P. 16

PHYSICAL TESTING                     目次
               AND                          CONTENTS

               CHEMICAL ANALYSIS                        Special Report

               PART   A: PHYSICAL TESTING   Quenching crack caused by common metallurgical defects in forged steel parts
                                            LI Pingping, LI Yuxin, XU Yan, WU Feihu, LIANG Xuedong, WANG Qun, LIU Dehua(1)
             Vol.59    No.6  (Monthly)      Cracking reason of 40MnBH steel shaft head
                             Jun. 2023
                                                           GAO Binke, ZHANG Chi, WU Feihu, LIANG Huilei, LI Pingping(7)
                                            Water leakage reason of SA-192 high frequency welding finned tube
                                                  XU Lei, CAI Yu, WANG Yanping, WANG Jianping, WANG Chunkai, ZHU Yin(10)
                                            Cracking cause of low temperature superheater tube
              封面 - - - - - - - - - - - -                                                           XIAO Wei(15)
          广
              天氏欧森测试设备(上海)有限公司              Cracking reason of stainless steel bellows expansion joint
          告                                                       LI Jiaxing, CHENG Lei, BAI Xuegang, KANG Haoyuan(19)
                                            Causes of leakage at T-joint of 304 austenitic stainless steel pipe       CAO Xinming,
          目                                           TANG Jiayun, SHI Changlong, CHEN Junyin, YANG Feng, QIN Congjun(22)
              封二- - - - - - - - - - - - -
          次                                             Test and Investigation
              谱弦测试技术(上海)有限公司                Slow strain rate tensile test of 304L stainless steel cladding for nuclear power
                                                                          ZHONG Duojun, HE Jun, CHEN Yao, LI Sha(25)
                                            Determination of continuous cooling transformation curve and transformation rule of
              彩色内页(前插)-----(P1-12)              82B high carbon steel wire rod                                                       TIAN Zhipeng(29)
                                            High temperature tensile properties of 45 steel continuously cast products
              韶关市先标实验设备有限公司            1                                              HUA Yanxia, LUO Chunmin(33)
                                                       Test Technique and Method
              上海申力试验机有限公司              2-3
                                            Performance improvement method of nozzle for self-energy arc extinguishing
              北京普瑞赛司仪器有限公司                4      chamber               ZHANG Taofeng, CHEN Dong, ZHANG Kexuan, LYU Xunhao,
                                                  XIAO Hexuan, YANG Chunyue, LYU Jin, ZHU Ke, LYU Min, DING Pengxiang(36)
              第27届中国国际质量控制与
                                            Large non-metallic inclusions in 37Mn5 steel                                      WANG Xiaojing(41)
              测试工业设备展览会                           4    Standardization
              齐齐哈尔华工机床有限公司           6-7    Comparison between American standard and national standard for determination of
                                                indentation diagonal in Vickers hardness test                   ZHOU Siyu, CAI Jing,
              上海材料研究所科技期刊杂志社         8        ZHANG Zhongyuan, ZHANG Hongyang, WANG Jian, ZHANG Jian, WANG Zheng(44)
                                                        Quality Control and Failure Analysis
              上海察微电子技术有限公司               9
                                            Corrosion reason of 304 stainless steel pressure pipe in anaerobic pretreatment
              武汉三灵新材料有限责任公司          10
                                                system of wastewater                                           LIU Zaikang, ZHANG Zijian,
              杭州朗杰测控技术开发有限公司       11                                JIN Wei, LU Ninghao, GUAN Pengtao, BAO Yuting(47)
                                            Causes of micro-crack formation in extraction hole of aluminum shell
              惠州检微科技有限公司                 12        XIONG Minghua, LI Yaofeng, SHAO Mingyan, WANG Yantao, ZHANG Mingying,
                                                           ZHAO Ke, LI Songlei, XIAO Hexuan, ZHAO Shengnan, LIU Cuicui(51)
                                            Causes of ball valve flame spraying coating falling off
              彩色内页(后插)----(P13-16)                                             YU Yanmin, CHE Pengcheng, LIU Qing(55)
                                            Leakage cause of inlet pipeline of urea units
              大连希望设备有限公司                 13         TAN Chuanjiang, ZHANG Jinxing, HOU Yongbin, WU Fei, CHEN Bailing(59)
                                            Fracture reason of thrust washer of needle roller thrust bearing
              上海金相机械设备有限公司                                                                   YU Nahong, ZHANG Ronghua(63)
              上海尚材试验机有限公司                  14  Reasons for abnormal mechanical properties of Q420GJC steel thick plate
                                                                                                 ZHANG Hua(66)
              公益                                         15  Review
              材料与测试网                               16  Development and application of lasting creep ability verification plan
                                                                                GONG Min, WANG Shuyang, FANG Jian(69)
                                            Common failure modes of diesel engine crankshaft
                                                     CONG Jianchen, YU Xiaodong, LYU Shijie, ZHANG Huadong, LIN Zhijun(73)
              封三 - - - - - - - - - - - -
              北京泰格瑞祥科技有限公司
                                                     Sponsored by Shanghai Research Institute of Materials
                                               Published by Periodical Office of Physical Testing and Chemical Analysis
                                               Edited by Physical Testing Editorial Department, PTCA
              封底 - - - - - - - - - - - -
                                                      Address: 99 Handan Road, Shanghai 200437, China
              岛津企业管理(中国)有限公司                                  Tel: 0086-021-65556775  Ext.361
                                                                  Fax: 0086-021-65544911
                                                                 E-mail: pt@mat-test.com
                                                              Website: http://www.mat-test.com
   11   12   13   14   15   16   17   18   19   20   21