Advanced Search

    column
    The revision process and technical improvement of ISO 4545-1:2023 and ISO 6507-1:2023
    HOU Xiaodong
    2024, 60(10): 1-4. DOI: 10.11973/lhjy-wl240030
    Abstract
    Standardization of instantaneous tensile strain hardening properties of metallic materials
    FANG Jian, LI Hetian, ZHANG Jianwei
    2024, 60(10): 5-8. DOI: 10.11973/lhjy-wl240055
    Abstract
    Interpretation of GB/T 38822—2020 standard
    ZHOU Bomou, LU Yanling
    2024, 60(10): 9-13. DOI: 10.11973/lhjy-wl240069
    Abstract
    Review of ISO 11531: 2022
    WU Yiwen, SHI Xiaofeng, ZHOU Wang, HOU Huining, XU Rui
    2024, 60(10): 14-16. DOI: 10.11973/lhjy-wl240174
    Abstract
    Comparison of new and old national standards and international standards for determination method of breaking force of steel wire rope
    ZHU Pei, WANG Weilu, SHI Xiaofeng, LU Yufei, WU Yiwen
    2024, 60(10): 17-20. DOI: 10.11973/lhjy-wl240028
    Abstract
    Analysis of evaluation method of free cementite in automobile sheet steel
    WEN Juan, ZHOU Xiaowei, LAI Ping, JU Xinhua
    2024, 60(10): 26-30. DOI: 10.11973/lhjy-wl240209
    Abstract
    Suggestions for modification of GB/T 2653—2008 standard
    ZHAI Lianna, XU Hejun, WANG Bin
    2024, 60(10): 31-36. DOI: 10.11973/lhjy-wl240222
    Abstract
    Effect of annealing process on microstructure and friction properties of interstitial-free atomic steel
    LI Yadong, E Hongwei, LIU Yu, ZHENG Xuebin, WANG Baochuan, JIN Lei
    2024, 60(10): 37-41. DOI: 10.11973/lhjy-wl230295
    Abstract
    Effect of hot rolling heating time on electromagnetic properties and inclusions of 1.8%Si non-oriented silicon steel
    WANG Siqin, GAO Xingjian, LEI Zhiliang
    2024, 60(10): 42-46. DOI: 10.11973/lhjy-wl240153
    Abstract
    Determination of continuous cooling transformation curve of 29CrMo steel
    SUN Ren, XU Lei, LI Jun, YU Liangyu, HUANG Guijun
    2024, 60(10): 47-51. DOI: 10.11973/lhjy-wl230280
    Abstract
    Identification method of solid waste properties of non-ferrous mining and metallurgical products
    JIANG Zhongming, LIU Jianbin, DUAN Yipin, XUAN Jianwen, MO Mingzhen
    2024, 60(10): 52-56. DOI: 10.11973/lhjy-wl240193
    Abstract
    A method for vibration characteristics and fatigue test of aero-engine rotor blades
    WU Qiong, DENG Ying, DENG Wujing, HE Bince
    2024, 60(10): 57-61. DOI: 10.11973/lhjy-wl240154
    Abstract
    Cause analysis method of inner surface irregular defects of oil cylinder
    XIE Degang, WANG Shanbao, ZHAO Bo, YUAN Qin, WANG Xixiang
    2024, 60(10): 62-66. DOI: 10.11973/lhjy-wl240112
    Abstract
    Causes of flywheel bolt fracture
    WANG Qirui, ZHANG Zhaoyan, LI Minglei, LIU Ning, HE Xiuna
    2024, 60(10): 67-70. DOI: 10.11973/lhjy-wl230274
    Abstract
    Fracture reason of cold drawn spring wire for nuclear fuel assembly
    HE Jun, ZHONG Duojun, LI Sha, LUO Linling
    2024, 60(10): 71-76. DOI: 10.11973/lhjy-wl240214
    Abstract