Advanced Search

    column
    Failure Analysis on Mechanical Equipments (Continued) Lecture 4 Metallographic Analysis Technique (Part I)
    WANG Rong
    2017, 53(2): 77-84,109. DOI: 10.11973/lhjy-wl201702001
    Abstract PDF
    Micro-mechanical Properties of Hydride in Zirconium Alloy
    ZHANG Cheng, LIU Jing-ru, YANG Yun, SONG Xi-ping
    2017, 53(2): 85-88. DOI: 10.11973/lhjy-wl201702002
    Abstract PDF
    Influence of Notch Shapes on Impact Toughness of Fe-based Sintered Material
    SUN Fang-fang, MA Shao-bo, BI Gang, WANG Feng, LI Qi-long
    2017, 53(2): 89-92,96. DOI: 10.11973/lhjy-wl201702003
    Abstract PDF
    Color-change Method to Detect and Characterize the Fatigue Damage Process of 304 Stainless Steel
    LIU Xin-yue, CHENG Cong-qian, LI Hui-fang, XU Jun, ZHAO Jie
    2017, 53(2): 93-96. DOI: 10.11973/lhjy-wl201702004
    Abstract PDF
    Effect of Heat Treatment Process on Microstructure and Mechanical Properties of 12Cr1MoV Steel
    SONG Wen-qiang, LI Shang-lin
    2017, 53(2): 97-100. DOI: 10.11973/lhjy-wl201702005
    Abstract PDF
    Application of CP-EPMA in Study of Phase Constitutes of SiCp/Al Composite
    HU Ying, ZHANG Lan-ting
    2017, 53(2): 101-104. DOI: 10.11973/lhjy-wl201702006
    Abstract PDF
    Application of Water Immersion Ultrasonic C-scan System in Defect Detection of Plasma Spraying Targets
    ZHANG Ke, CHEN Qin-zhong, LI Qiang
    2017, 53(2): 105-109. DOI: 10.11973/lhjy-wl201702007
    Abstract PDF
    On-line Ultrasonic Measurement of Pulverized Coal Flux in Coal-powder Boilers
    HOU Huai-shu, CHEN Chao-lei, ZHU Bing-bing, YAN Zhen-rong
    2017, 53(2): 110-113. DOI: 10.11973/lhjy-wl201702008
    Abstract PDF
    Measurement Uncertainty Evaluation of Brinell Hardness Test of the Flat-rolled Steel Sheets
    WU Wei
    2017, 53(2): 114-117. DOI: 10.11973/lhjy-wl201702009
    Abstract PDF
    Requirement and Application Scope of Data Rounding of Tensile Strength of Metallic Materials
    XU Fang
    2017, 53(2): 118-119,122. DOI: 10.11973/lhjy-wl201702010
    Abstract PDF
    Fault Analysis and Maintenance of Quanta 400F Scanning Electron Microscope
    YAO Li-juan, LONG Wei, JIN Chang-qing, JIN Yao-hua, ZHU Man
    2017, 53(2): 120-122. DOI: 10.11973/lhjy-wl201702011
    Abstract PDF
    Effectiveness Evaluation of Interlaboratory Comparison Based on Case Analysis
    ZHU Shun
    2017, 53(2): 123-126. DOI: 10.11973/lhjy-wl201702012
    Abstract PDF
    Failure Analysis on Casting High Aluminum Zinc Based Alloy ZA27 Worm Gear in Elevator Traction Machine
    ZHANG Jie, LI Xiao-hua, WU Ji-quan
    2017, 53(2): 127-131. DOI: 10.11973/lhjy-wl201702013
    Abstract PDF
    Reasons Analysis on Cracking of High Strength Steel Plates in the Process of Tube-making
    LEI Na, WU Ke-min, ZHAO Nai-sheng, CUI Quan-fa
    2017, 53(2): 132-135. DOI: 10.11973/lhjy-wl201702014
    Abstract PDF
    Failure Analysis on Fractue of Belt Conveyor Roller Shafts
    ZHU Hui-hui, LUO Xiao-ping
    2017, 53(2): 136-139,143. DOI: 10.11973/lhjy-wl201702015
    Abstract PDF
    Fracture Analysis of End Shaft of a Forklift Axle Housing
    YANG Dong-mei, XIAO Wu, DONG Xin-quan
    2017, 53(2): 140-143. DOI: 10.11973/lhjy-wl201702016
    Abstract PDF
    Reasons Analysis on Surface Bubbling of Electric Vacuum Oxygen Free Copper Bars
    LI Xiang-hai, JIANG Chang-le
    2017, 53(2): 144-146,149. DOI: 10.11973/lhjy-wl201702017
    Abstract PDF
    Cause Analysis on Abnormal Phenomenon of 34Cr2Ni2Mo Steel Flange Forks
    E Xin, SHI Wei, YANG Li, QI Hong-mei
    2017, 53(2): 147-149. DOI: 10.11973/lhjy-wl201702018
    Abstract PDF