Citation: | DING Xiao-feng, GUAN Rong, CHEN Pei-zhi. RECENT DEVELOPMENT OF CONTACT ANGLE MEASUREMENT TECHNIQUE[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2008, 44(2): 84-89. |
[1] |
Santos,Mohamed,Bannwart,et al. Contact angle measurements and wetting behavior of inner surfaces of pipelines exposed to heavy crude oil and water[J]. J Petrol Eng,2006,51(1/2):9.
|
[2] |
Wouters,Ruiter. Contact-angle development of polymer melts[J]. Prog Org Coat,2003,48(2-4):207.
|
[3] |
Blake. The physics of moving wetting lines[J]. J Colloid Interf Sci,2006,299(1):1-13.
|
[4] |
郑群锁.低表面能防污涂料的进展[J].材料开发与应用,2001,16(1):33.
|
[5] |
沈 洁,董 昊,张永熙,等.溶胶-凝胶法制备二氧化钛薄膜的亲水性研究[J].真空科学与技术,2000,20(6):385.
|
[6] |
Tavana,Simon,Grundke,et al. Interpretation of contact angle measurements on two different fluoropolymers for the determination of solid surface tension[J]. J Colloid Interf Sci,2005,291(2):497-506.
|
[7] |
Smedley,Coles. A refractive tilting-plate technique for measurement of dynamic contact angles[J]. J Colloid Interf Sci,2005,286(1):310-311.
|
[8] |
Bateni,Susnar,Amirfazli,et al. A high-accuracy polynomial fitting approach to determine contact angles[J]. Colloid Surface A,2003,219(1/3):215-219.
|
[9] |
Stalder,Kulik,Sage,et al. A snake-based approach to accurate determination of both contact points and contact angles[J]. Colloid Surface A,2006,286(1-3):92-103.
|
[10] |
Dingle,Harris. A robust algorithm for the simultaneous parameter estimation of interfacial tension and contact angle from sessile drop profiles[J]. J Colloid Interf Sci,2005,286(2):670-680.
|
[11] |
Della,Maniglio,Morra,et al. The determination of a stable-equilibrium contact angle on heterogeneous and rough surfaces[J]. Colloid Surface A,2002,206(1-3):47-67.
|
[12] |
Yang,Lin. A method for correcting the contact angle from the method[J]. Colloid Surface A,2003,220(1-3):199-210.
|
[13] |
Bardos. Contact angle dependence of solid probe–liquid drop forces in AFM measurements[J]. Surf Sci,2002,517(1-3):157-176.
|
[14] |
Bashforth,Adams. An Attempt to Test the Theory of Capillary Action[M]. Cambridge: Cambridge University Press,1995:1892-1896.
|
[15] |
Cabezas,Bateni,Montaner,et al. A new method of image processing in the analysis of axisymmetric drop shapes[J]. Colloid Surface A,2005,255(1-3):193-200.
|
[16] |
Zuo Ding,Bateni,Hoorfar,et al. Improvement of interfacial tension measurement using a captive bubble in conjunction with axisymmetric dropshape analysis (ADSA)[J]. Colloid Surface A,2004,250(1/3):233-246.
|
[17] |
Tavana,Neumann. On the question of rate-dependence of contact angles[J]. Colloid Surface A,2006,282/283:256-262.
|
[18] |
Oliver,Huh,Mason. The apparent contact angles of liquids on finely-grooved solid surfaces-a SEM study[J]. J Adhes,1977,8(1):223-234.
|
[19] |
Kwok,Lin,Mui,et al. Low-rate dynamic and static contact angles and the determination of solid surface tensions[J]. Colloid Surface A,1996,116(1/2):63-77.
|
[20] |
Katoh,Tsao,Yamamoto,et al. A new method for measuring contact angle and liquid surface tension applying detachment of two-dimensional meniscus[J]. J Colloid Interf Sci,1998,202(1):54-62.
|