Citation: | LIU Mei-hua, LI Hong-qi, JI Hong-wei, TONG Jing-wei. APPLICATION AND STUDYING CURRENT STATUS OF THE INDENTATION HARDNESS TESTING[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2008, 44(9): 485-490. |
[1] |
Cheng Yang-Tse,Cheng Che-Min. Scaling,dimensional analysis and indentation measurements[J]. Materials Science and Engineering R ,2004,44: 91-149.
|
[2] |
杨 迪. 金属硬度实验[M]. 北京: 中国计量出版社,1983.
|
[3] |
Bhushan B,Gupta B K. Handbook of Tribology [M]. New York: McGraw-Hill,1991.
|
[4] |
虞伟良. 硬度测试技术的新动态与发展趋势[J]. 理化检验-物理分册,2003,39(8): 401-406.
|
[5] |
韩德伟. 金属的硬度及其试验方法[M]. 长沙: 湖南科学技术出版社,1983.
|
[6] |
杨 迪,李福欣. 显微硬度试验[M]. 北京: 中国计量出版社,1988: 1.
|
[7] |
完卫国. HS与HRC,HV硬度互换的数学公式[J]. 理化检验-物理分册,1993,29(6): 53.
|
[8] |
苑凤忠. 球形压头布氏硬度与洛氏硬度值之间的理论关系[J]. 山东工业大学学报,1989,19(3): 69-74.
|
[9] |
郑远谋. 抛光时间和表面粗糙度对铸铁材料硬度测试数据的影响[J]. 机械强度,1992,11(2): 63-68.
|
[10] |
林丽华,陈立功,顾明元. 静载压痕残余应力测量的简化模型[J]. 上海交通大学学报,1998,32(2):91-94.
|
[11] |
Tabor D. The hardness of metals[M]. Oxford: Clarendon Press,1952.
|
[12] |
Oliver W C,Pharr G M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments [J]. J Mater Res,1992,7(6): 1564-1583.
|
[13] |
Chang Y T,Chang C M. Relationship between hardness,elastic modulus and the work of indentation[J]. Appl Phys Lett,1998,73: 614-616.
|
[14] |
王长春.LD合金抗拉强度与硬度关系探讨[J]. 理化检验-物理分册,1996,32(6): 50.
|
[15] |
顾丽英. GT60-2抗拉强度与硬度关系的探讨[J]. 理化检验-物理分册,1995,31(5): 46.
|
[16] |
Juhasz A,Tasnadi P. Investigation of the superplasticity of tin-lead eutectie by impression creep tests[J]. J Mater Sci,1986,21(10): 3287-3291.
|
[17] |
Yang F Q,Li J C M. Computer of impression creep using the hyperbolie sine stress law[J]. Mater Sci Eng,1995,A201: 50-57.
|
[18] |
Raman V,Berriche R. An investigation of the creep processes in tin and aluminum using a depth-sensing indentation technique[J]. J Mater Res,1992,7(3): 627-638.
|
[19] |
万建松,岳珠峰.采用压痕实验获得材料性能的研究现状[J]. 实验力学,2002,17(2): 131-139.
|
[20] |
Chudoba T,Richter F. Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results[J]. Surface and Coatings Technology,2001,148(2,3):191.
|
[21] |
Li J C M. Impression creep and other localized tests[J]. Materials Science and Engineering A,2002,322(1,2): 23-42 .
|
[22] |
刘 澄,张国定. 用超显微硬度方法研究复合材料微区力学性能[J]. 机械工程学报,1999,23(2): 20-23.
|
[23] |
张福勤,李怀明,杨 让. 钢轨的疲劳寿命、磨损抗力与组织和硬度的关系[J]. 钢铁,1991,26(7): 43-47.
|
[24] |
田永生. 铸铁硬度与切削加工性能的关系[J].钢铁研究学报,1998,10(2): 74-76.
|
[25] |
李河清,蔡 珣,陈秋龙. 纳米压入技术表征薄膜(涂层)的力学性能[J]. 材料热处理学报,2001,22(4): 52-55.
|
[26] |
李河清,蔡 珣,马 峰,等.影响薄膜(涂层)硬度测试的因素[J]. 材料保护,2001,34(9):47-49.
|
[27] |
Brotzen F R. Mechanics testing of thin films[J]. International Material Reviews,1994,39(1): 24-44.
|
[28] |
陈隆庆,赵明嗥,张统一. 薄膜的力学测试技术[J]. 机械强度,2001,23(4): 413-429.
|
[29] |
Joslin D L,Oliver W C.A new method for analyzing data from continuous depth -sensing micro-indentation tests[J]. J Mater Res,1990,5(1):123-126.
|
[30] |
Pharr G M,Oliver W C. On the generality of the relationship among stiffness contact area and elastic modulus during indentation[J]. J Mater Res,1992,7(3): 613-617.
|
[31] |
Chen Y T. Cheng C M. Relationships between hardness,elastic modulus,and the work of indentation[J]. Appl Phys Lett,1998,73(5):614-616 .
|