Citation: | ZHENG Peng-fei, CHEN Ji-ming, MUROGA T, LI Cong, LIANG Bo. Strengthening of V-4Cr-4Ti Alloy by Aging and Cold-working[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2009, 45(5): 253-259. |
[1] |
MUROGA T,NAGASAKA T,ABE K,et al. Vanadium alloys ——overview and recent results[J]. J Nucl Mater,2002,307/311: 547-554.
|
[2] |
SAKAI K,SATOU M,FUJIWARA M,et al. Mechanical properties and microstructures of high-chromium V-Cr-Ti type alloys[J]. J Nucl Mater,2004,329/333: 457-461.
|
[3] |
CHEN J M. V-W-Ti alloys[C]//. Presented at the 7th IEA and JUPITER-II Joint Workshop on the Critical Issues for Vanadium Alloys for Fusion Application. Toki,Gifu,Japan: [s.n.],2003: 15-16.
|
[4] |
MUROGA T,NAGASAKAA T,CHEN J M,et al. Microstructure of creep-deformed V-4Cr-4Ti strengthened by precipitation and cold rolling[C]//. ICFRM-13. 3313-3320. France:[s.n.],2007:10-14.
|
[5] |
陈勇,谌继明,邱绍宇. 钒合金的沉淀析出行为和时效强化[J]. 稀有金属,2006,30(3):295-299.
|
[6] |
CHEN J M,MUROGA T,NAGASAKA T,et al. The mechanical properties of V-4Cr-4Ti in various thermo-mechanical states[J]. Fus Eng Des,2006,81(23/24): 2899-2905.
|
[7] |
KOYAMA M,FUKUMOTO K,MATSUI H. Effects of purity on high temperature mechanical properties of vanadium alloys[J]. Journal of Nuclear Materials,2004,329/333: 442-446.
|
[8] |
NAGASAKA T,HEO N J,MUROGA T,et al. Examination of fabrication process parameters for improvement of low-activation vanadium alloys[J]. Fus Eng Des,2002,61/62: 757.
|
[9] |
潘金生,仝健民,田民波.材料科学基础[M]. 北京:清华大学出版社,1998:589.
|
[10] |
CHEN J M,MUROGA T,NAGASAKA T,et al. Precipitation behavior in V-6W-4Ti,V-4Ti and V-4Cr-4Ti alloys[J]. J Nucl Mater,2004,334: 159-165.
|
[11] |
TYOMENTSEV A N,KOROTAEV A D,PINZHIN YU P,et al. Effect of the modes of thermomechanical treatment on the formation of the multiphase and grain structure of V-4Ti-4Cr alloys[J]. Journal of Nuclear Materials,2004,329/333: 429-433.
|
[12] |
ROWCLIFFE A F,ZINKLE S J,HOELZER D T. Effect of strain rate on the tensile properties of unirradiated and irradiated V-4Cr-4Ti[J]. J Nucl Mater,2000,283/287/343: 508-512.
|