Influences of Heat Treatment Temperatures on Mechanical Properties and Secondary-phase Particles of IF Steel Sheets

WU Yi-wen; ZHU Zi-heng; XU Ling-yun; JI Jing; WANG Biao

PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING > 2015 > 51(2): 87-91.

WU Yi-wen, ZHU Zi-heng, XU Ling-yun, JI Jing, WANG Biao. Influences of Heat Treatment Temperatures on Mechanical Properties and Secondary-phase Particles of IF Steel Sheets[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2015, 51(2): 87-91.

Citation:

PDF (2562 KB)

Influences of Heat Treatment Temperatures on Mechanical Properties and Secondary-phase Particles of IF Steel Sheets

More Information

Received Date: December 19, 2014

Graphical Abstract

Abstract

Abstract

Different temperatures heat treatment was carried out on annealing IF steel sheets and the influences of heat treatment temperatures on microstructure and mechanical properties of the IF steel sheets were studied.The results show that the carbonaceous secondary-phase particles distributed dispersedly in grains of the IF steel sheets.With the increase of heat treatment temperature,the amount of secondary-phase particles decreased,the yield strength and tensile strength of the steel increased,and the value of r (plastic strain ratio) and n (tensile strain hardening exponent) decreased.That is to say,the deep drawability of the IF steel sheets decreased with the increase of heat treatment temperature.
- IF steel sheet,
- heat treatment temperature,
- secondary-phase particle,
- mechanical property

FullText(HTML)

References (10)

References

[1]	李守华,李俊.汽车用高强度IF钢的研究进展[J].上海金属,2007,29(5):66-70.
[2]	马衍伟,王先进.超深冲IF钢研究的最新进展[J].钢铁,1998,33(4):65-69.
[3]	康永林.现代汽车板的质量控制与成型性[M].北京:冶金工业出版社,1999:34-39.
[4]	关小军,周家娟,朱学钢.终轧温度对Ti+Nb处理的高强IF钢板织构的影响[J].钢铁研究,2001(1):16-19.
[5]	邱昱斌,贾旭.热轧出炉温度对IF钢r值的影响[J].宝钢技术,2004(S):36-39.
[6]	MARTINE V J,VERDEJA J I,PERO-SANZ J A.Interstitial free steel influence of a phase hot-rolling and cold-rolling reduction to obtain extra-deep drawing quality[J].Materials Characterization,2001,46(1):45-53.
[7]	PERO-SANZ J,RUIZ-DELGADO M,MARTINE V,et al.Annealing textures for drawability:Influence of the degree of cold rolling reduction for low-carbon and extra low-carbon ferritic steels[J].Materials Characteri-zation,1999,43(5):303-309.
[8]	SATOH S.Effect of precipitate dispersion on recrystallization texture of Nb steel sheet[J].Transactions of the ISIJ,1986,26:737-743.
[9]	KATON H.Proceedings of the international sympo-sium on technology of continuously annealed cold-rolled sheet steel[C]//Detroit:TMS-AIME,1984:37-58.
[10]	HUA M,GARCIAL C I,DEARDO A J.Multi-phase precipitates in interstitial-free steels[J].Scrita Meta-llurgica et Materialia,1993,28(8):973-978.

Cited By

Get Citation

PDF

XML

Article views (4) PDF downloads (0)

Turn off MathJax

Article Contents

Abstract

References

Influences of Heat Treatment Temperatures on Mechanical Properties and Secondary-phase Particles of IF Steel Sheets

Abstract

References

Catalog

Export File

Citation

Format

Content