Citation: | SONG Haibin. Evaluation of measurement uncertainty of Vickers hardness test[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2025, 61(2): 14-16. DOI: 10.11973/lhjy-wl230363 |
According to GB/T 4340.1—2009 and JJF 1059.1—2012, various influencing factors in the Vickers hardness test were fully considered to evaluate the measurement uncertainty of the Vickers hardness test, and compared the various influencing factors. The results show that factors such as the properties of the hardness tester itself, measurement errors of indentation diagonal length, uniformity of the tested sample, and magnitude of loading force had a significant impact on measurement uncertainty. Therefore, in the metal Vickers hardness test, selected a high-precision hardness tester, increased the number of measurements as much as possible, chose a location with good uniformity for testing, and selected a relatively large loading force could effectively reduce measurement uncertainty and obtain accurate test data.
[1] |
张宪,穆丹宁 .金属材料维氏硬度试验测量不确定度的评定[J].理化检验(物理分册),2017,53(6):410-412.
|
[2] |
张洁,张祥瑞,何国强,等 .DP780高强钢电阻焊接头维氏硬度测量不确定度评定[J].理化检验(物理分册),2021,57(7):20-24.
|
[3] |
潘飚 .5252H32铝合金维氏硬度试验的测量不确定度评定[J].理化检验(物理分册),2019,55(1):33-34.
|
[4] |
孟祥亮 .铜管显微维氏硬度测定结果的不确定度评定[J].理化检验(物理分册),2011,47(10):641-643.
|
[5] |
余泽利,郑晓斐,张浩,等 .金属维氏硬度试验测量不确定度的评定[J].四川有色金属,2018(4):46-48.
|