Citation: | ZHAO Yinghui, XIA Wenbin, ZHOU Yong, ZHAO Jianming. Fracture reason of P110S steel grade tubing body[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2024, 60(4): 68-71. DOI: 10.11973/lhjy-wl202404017 |
Fracture occurred at 8 m below the coupling of P110S steel grade tubing in an oil well. The causes of tubing fracture were analyzed by macroscopic observation, chemical composition analysis, metallographic examination, scanning electron microscopy and energy spectrum analysis, X-ray diffraction analysis and other methods. The results show that the mechanical properties of the tubing were unstable, and the corrosion products on the fracture of the tubing were mainly FeS. The high strength, low service temperature and large mass of the tubing led to the formation of sulfide stress corrosion cracking inside the tubing.
[1] |
赵海洋,叶帆,汤晟,等.某油井 P110油管腐蚀穿孔原因[J].机械工程材料,2020, 44(2):82-86.
|
[2] |
李鹤林.油井管发展动向及若干热点问题(上)[J].钢管,2005, 34(6):1-6.
|
[3] |
王尚卫,罗有刚,赵鹏玉,等.外加厚P110钢级油管的断裂原因[J].机械工程材料,2022, 46(8):122-126.
|
[4] |
杨琦,王尚卫,程飞,等.30 CrMo光杆断裂失效原因分析[J].石油管材与仪器,2022, 8(6):70-73.
|
[5] |
冯耀荣,付安庆,王建东,等.复杂工况油套管柱失效控制与完整性技术研究进展及展望[J].天然气工业,2020, 40(2):106-114.
|
[6] |
林乃明,谢发勤,吴向清,等.油套管表面防护技术的研究现状与展望[J].腐蚀与防护,2009, 30(11):801-805.
|
[7] |
韩燕,姬蕊,吕玉海,等.某N80S油管腐蚀穿孔的失效分析[J].腐蚀与防护,2019, 40(12):933-937.
|
[8] |
王凯油井管材料液固两相流体冲刷腐蚀研究西安西安石油大学2013王凯.油井管材料液固两相流体冲刷腐蚀研究[D].西安:西安石油大学,2013.
|
[9] |
黄永昌,张建旗.现代材料腐蚀与防护[M].上海:上海交通大学出版社,2012.
|
[10] |
冯耀荣,李鹤林.石油钻具的氢致应力腐蚀及预防[J].腐蚀科学与防护技术,2000, 12(1):57-59.
|
[11] |
董晓明高强度抗腐蚀油管和套管用钢的抗H2S应力腐蚀行为研究上海上海大学2019董晓明.高强度抗腐蚀油管和套管用钢的抗H2S应力腐蚀行为研究[D].上海:上海大学,2019.
|
[12] |
闫湃,龙岩,窦伟,等.某西部油田高温高压气井连续油管断裂原因[J].理化检验(物理分册),2022, 58(1):18-22.
|