Citation: | GU Xiurui, LIU Lijun, LIU Yanxia, BAI Lijuan, DUAN Luzhao, SONG Yue. Display method for microstructure of high manganese steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2024, 60(3): 20-22. DOI: 10.11973/lhjy-wl202403005 |
Two methods for displaying the microstructure of high manganese steel with different manganese contents were introduced. Using oxalic acid+nitric acid+sodium metabisulfite+anhydrous ethanol solution as the corrosion solution, wear-resistant high manganese steel with a manganese content of 11% to 14% was corroded at room temperature, resulting in clear, complete and brightly colored microstructure morphology. The composite method of nitric acid+anhydrous ethanol solution and hydrochloric acid+anhydrous ethanol solution was used to corrode high manganese steel in ultra-low temperature environments with a mass fraction of manganese elements ranging from 22% to 28%, and clear microstructure morphology could be obtained.
[1] |
张文利,罗先甫,陈飞,等.高锰钢实海环境暴露试验与实验室加速腐蚀试验结果对比[J].理化检验(物理分册),2022, 58(9):5-10.
|
[2] |
严新永,亢淑梅,严玲,等.高锰钢和9Ni钢在模拟海水中的应力腐蚀行为对比研究[J].材料保护,2023, 56(2):34-43.
|
[3] |
张思悦,亢淑梅,姜长泽,等.高锰钢在液化天然气储罐应用的研究进展[J].科学与信息化,2023(1):126-128.
|
[4] |
彭伟,王晓荣,庄文玮.硼合金化处理对高锰钢组织和性能的影响[J].机电工程技术,2023, 52(1):37-39.
|