• 中国学术期刊(光盘版)全文收录期刊
  • 中国学术期刊综合评价数据库来源期刊
  • 中国期刊网、万方数据库入编期刊
  • 中文科技期刊数据库(全文版)收录期刊
  • 中国期刊全文数据库全文收录期刊
  • 中国机械工程学会 理化检验分会 失效分析分会 会刊
Advanced Search
ZHANG Zhikui, ZHAO Hongyu, ZHANG Chunhuan. Acoustic Emission Characteristics of Steel Sample with Crack During Tension[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(3): 27-30,36. DOI: 10.11973/lhjy-wl202103006
Citation: ZHANG Zhikui, ZHAO Hongyu, ZHANG Chunhuan. Acoustic Emission Characteristics of Steel Sample with Crack During Tension[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(3): 27-30,36. DOI: 10.11973/lhjy-wl202103006

Acoustic Emission Characteristics of Steel Sample with Crack During Tension

More Information
  • Received Date: April 02, 2020
  • For SM490A steel and SUS304 steel samples with I type cracks, the mechanical characteristics of cracks tip and plastic deformation regions were analyzed by measuring the acoustic emission characteristic parameters and the temperatures at the specific points of crack tips during tensile fracture. The results show that the acoustic emission energy count and ring cumulative count have obvious curve characteristics in each stage of crack growth, and the curve characteristics are basically consistent with the stress-strain curves of yield and strengthening stages. Therefore, the acoustic emission energy count and ring cumulative count can be used to describe the plastic deformation at the yield and strengthening stages. The temperature change of sample from deformation to fracture be determined by plastic deformation rate. For SM490A steel and SUS304 steel with I type cracks, the acoustic emission signals mainly focus on the plastic deformation stage and crack growth stage.
  • [1]
    徐长航, 刘立群,陈国明.钢制试件拉伸断裂及疲劳开裂声发射特征分析[J].中国石油大学学报(自然科学版),2009,33(5):95-99.
    [2]
    龚斌,包日东,齐辉,等.带缺口塑性材料的声发射特性研究[J].声学技术,2006,25(1):30-34.
    [3]
    张颖,李彬,赵广宇,等.金属塑性材料细观损伤过程声发射特性实验研究[J].中国测试,2015,41(1):115-119.
    [4]
    何舒,马羽宽,杨建波.含不同缺陷的金属材料声发射特性[J].吉林大学学报(工学版),2003,33(4):21-25.
    [5]
    陈云华,张平,卢柳林.非金属夹杂物对钢制零件产品质量的影响[J].理化检验(物理分册),2005,41(11):556-558.
    [6]
    巴发海,李凯,王飞,等.碳化钨颗粒增强金属基复合涂层制备工艺研究及发展现状[J].理化检验(物理分册),2017,53(10):720-724.
    [7]
    范立坤.增材制造用金属粉末材料的关键影响因素分析[J].理化检验(物理分册),2015,51(7):480-482.
    [8]
    MOSTAFAVI S,FOTOUHI M,MOTASEMI A,et al. Acoustic emission methodology to evaluate the fracture toughness in heat treated AISI D2 tool steel[J]. Journal of Materials Engineering and Performance,2012,21(10):2106-2116.
    [9]
    LEE J K,LEE J H,LEE S P,et al. Acoustic emisson and ultrasonic wave characteristics in TIG-welded 316 stainless steel[J].Metals and Materials International,2014,20(3):483-488.
    [10]
    MERIAUX J,BOINET M,FOUVRY S,et al. Identification of fretting fatigue crack propagation mechanisms using acoustic emission[J].Tribology International,2010,43(11):2166-2174.
    [11]
    NAGATA M,FUJITA M,YAMADA M,et al. Evaluation of tribological properties of bearing materials for marine diesel engines utilizing acoustic emission technique[J].Tribology International,2012,46(1):183-189.
    [12]
    SCHOLEY J J,WILCOX P D,WISNOM M R,et al. Quantitative experimental measurements of matrix cracking and delamination using acoustic emission[J].Composites Part A:Applied Science and Manufacturing,2010,41(5):612-623.
    [13]
    HAMSTAD M A. A review:acoustic emission,a tool for composite-materials studies[J].Experimental Mechanics,1986,26(1):7-13.

Catalog

    Article views (5) PDF downloads (0) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return