• 中国学术期刊(光盘版)全文收录期刊
  • 中国学术期刊综合评价数据库来源期刊
  • 中国期刊网、万方数据库入编期刊
  • 中文科技期刊数据库(全文版)收录期刊
  • 中国期刊全文数据库全文收录期刊
  • 中国机械工程学会 理化检验分会 失效分析分会 会刊
Advanced Search
JIAO Shaoyang, ZHANG Hongwei, WANG Baoshun, ZHENG Yue, LU Xiaohui, CUI Lan. Effect of Test Temperature on Tensile Properties of P280GH Steel Elbows Used in Nuclear Power Plant with Different Heat Treatment Conditions[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2020, 56(3): 1-7. DOI: 10.11973/lhjy-wl202003001
Citation: JIAO Shaoyang, ZHANG Hongwei, WANG Baoshun, ZHENG Yue, LU Xiaohui, CUI Lan. Effect of Test Temperature on Tensile Properties of P280GH Steel Elbows Used in Nuclear Power Plant with Different Heat Treatment Conditions[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2020, 56(3): 1-7. DOI: 10.11973/lhjy-wl202003001

Effect of Test Temperature on Tensile Properties of P280GH Steel Elbows Used in Nuclear Power Plant with Different Heat Treatment Conditions

More Information
  • Received Date: February 28, 2019
  • The tensile tests of P280GH steel elbows used in nuclear power plant were carried out at different temperatures (25,50,100,150,200,250,300,316℃) under heat treatment for mechanical properties (HTMP) condition, heat treatment for mechanical properties and simulated stress relieving heat treatment (HTMP+SSRHT) condition. The effects of temperatures on the tensile properties of P280GH steel elbows with different heat treatment conditions were studied. The results show that the tensile strength and yield strength of P280GH steel elbows in HTMP state were higher than those in HTMP+SSRHT state. In the two states, when the temperature rose from room temperature to 316℃, the tensile strength of P280GH steel first decreased and then increased, and the yield strength continued to decrease, and the "blue brittleness" phenomenon appeared at 300℃. When the service temperature was 150~250℃, the mechanical properties of the material should be tested under the service temperature.
  • [1]
    焦少阳,李茂林,郑越,等. 核电厂主蒸汽系统用P280GH弯头热推制成形工艺评定[J]. 热加工工艺,2018,47(21):160-164.
    [2]
    徐恒钧. 材料科学基础[M]. 北京:北京工业大学出版社,2001.
    [3]
    伊万诺娃BC, 李献璐. 金属在拉伸曲线各阶段中进行塑性变形时的几个特点[J]. 金属学报,1958,3(4):253-259.
    [4]
    董明洪,党恒耀,李慧,等. 金属材料高温拉伸试验过程要点分析[J]. 理化检验(物理分册),2018,54(5):326-328.
    [5]
    张琼. 低碳钢拉伸变形时影响蓝脆的影响[J]. 材料科学进展,1988,2(6):87-90.
    [6]
    TAO Z J, YANG H, LI H. Quasi-static tensile behavior of large-diameter thin-walled Ti-6Al-4V tubes at elevated temperature[J]. Chinese journal of aeronautics,2016,29(2):542-553.
    [7]
    王敏杰,胡荣生,刘培德. 金属切削中的蓝脆消应与热塑剪切失稳[J]. 科学通报,1990,8:634-636.
    [8]
    赵旭红,黄有光,李铭华. 核电汽轮机用钢蓝脆和应力腐蚀的交互作用[J]. 金属学报,1997,33(8):844-850.
    [9]
    GUO L F, WANG Y X, LI Z. A Study on the tensile properties of materials at elevated temperature in RCC-M[C]//Pacific Basin Nuclear Conference.Singapore:Springer Singapore, 2017:29-41.

Catalog

    Article views (5) PDF downloads (0) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return