Citation: | LI Wanmin, CHEN Yunlong, TIAN Hongzhi. Comparison and Analysis of Different Standard System Requirements for Tensile Test of Nuclear Power Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2018, 54(9): 647-649,675. DOI: 10.11973/lhjy-wl201809006 |
[1] |
聂月生. 对金属材料室温拉伸试验影响因素的分析与探讨[J]. 广西质量监督导报,2008(9):82-83.
|
[2] |
乐金涛,李玲,刘乐. 对拉伸试验方法标准GB/T 228.1-2010的思考[J]. 理化检验(物理分册),2015,51(2):83-86.
|
[3] |
吴勇,陈敬海,张志军,等. GB/T 228.1-2010中金属材料拉伸试验速率控制方法的分析[J]. 理化检验(物理分册),2015,51(11):786-791.
|
[4] |
孙绍广,于秀娥,苏洪英,等. 拉伸试验速率控制模式及试验速率的选择[J]. 理化检验(物理分册),2013,49(8):497-500.
|
[5] |
林珍奇. 金属材料室温拉伸试验的几个重要影响因素的控制[J]. 中国建筑金属结构,2013(12):153-154.
|
[1] | JIN Jingjing, ZHAI Lianna, WANG Bin. Lastest Progress of Transverse Tensile Test Standards for Metallic Material Welds at Home and Abroad and Amendents for GB/T 2651-2008[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(6): 58-61. DOI: 10.11973/lhjy-wl202106013 |
[2] | ZHAI Lianna, JIN Jingjing. Present Situation of Standardization of Vickers Hardness Testing on Welds in Metallic Materials at Home and Abroad[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(2): 49-53. DOI: 10.11973/lhjy-wl202102012 |
[3] | SONG Xiuwen. Analysis and Comparison of Three Charpy Impact Test Method Standards for Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(2): 45-48. DOI: 10.11973/lhjy-wl202102011 |
[4] | ZHAI Lianna. Development of Destructive Test Standards on Welds of Metallic Materials at Home and Abroad[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2020, 56(12): 43-47,56. DOI: 10.11973/lhjy-wl202012011 |
[5] | JIN Jingjing. Influence of Test Temperature on Tensile Test Results of Metallic Material Welded Joints[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2020, 56(12): 39-42. DOI: 10.11973/lhjy-wl202012010 |
[6] | ZHOU Zhichao, LE Jintao, YANG Yanlong. Analysis on New Standard for Rockwell Hardness Test of Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2019, 55(6): 368-370. DOI: 10.11973/lhjy-wl201906002 |
[7] | XU Hejun, ZHANG Jianwei, LING Xiao, BA Fahai. Comparison among Domestic and Overseas Standards of Instrumented Impact Test of Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2018, 54(3): 181-186,194. DOI: 10.11973/lhjy-wl201803006 |
[8] | YE Hong-de. Some Considerations on Tensile Testing Standard of Metallic Materials[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2014, 50(6): 394-395. |
[9] | CEN Feng, CHEN Yi-hua, ZHANG Ke. Comparison Analysis of New and Old National Standards for Metallic Materials Tensile Test at Room Temperature[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2012, 48(12): 804-807. |
[10] | ZONG Qiu-li, SUN Hong, WANG Hai-yan, CUI Er-wei. Brief Introduction to Metallic Materials Charpy Impact Testing Method of GB/T 229-2007[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2010, 46(3): 190-192. |