Citation: | WANG Shuo, CHENG Yi, SHEN Lei. Cause Analysis on Significant Decrease of Impact Toughness of Hot-pressed 13MnNiMoR Steel Vessel Heads[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2017, 53(1): 67-69. DOI: 10.11973/lhjy-wl201701015 |
[1] |
GB 713-2014锅炉和压力容器用钢板[S].
|
[2] |
刘洪,曾会强,刘志勇,等.国产13MnNiMo5-4厚板焊接工艺试验研究[C]//中西南十省区(市)焊接学会联合会第九届年会论文集.贵阳:贵州省机械工程学会,2006:110-112.
|
[3] |
杨浩,曲锦波.热循环对13MnNiMoR钢焊接热影响区显微组织和韧性的影响[J].机械工程材料,2015,39(9):37-40.
|
[4] |
黄荣杰,杨朝瑞,陈小凤.13MnNiMoR钢热成型封头冲击值不合格原因分析及处理方法[J].工业锅炉,2012(2):26-29.
|
[5] |
王储,胡昕明,韩旭,等.锅炉汽包用13MnNiMo5-4特厚钢板的研制[J].上海金属,2015,37(4):21-25.
|
[6] |
于雄.汽包用大厚度13MnNiMoR钢板的研发[J].特钢技术,2016,22(1):19-22.
|
[7] |
高焕丽,冯玉庆.2.25Cr-1Mo钢热成型封头带状组织的消除[J].压力容器,2007,24(10):48-51.
|
[8] |
袁永旗,唐郑磊,许少普,等.特厚低温压力容器用09MnNiDR钢板的研制[J].轧钢,2016,33(3):16-19.
|
[1] | LI Gang, QI Wenkuan, SHI Wei, ZHAO Xilong, E Xin, SU Yaning, LIANG Xiaowu. Effect of simulated post-weld heat treatment temperature on welding residual stress and mechanical properties of Q345R steel plate welded joint[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2022, 58(3): 10-13. DOI: 10.11973/lhjy-wl202203003 |
[2] | WU Zhenghuan, GU Liwen, HUANG Lifeng, LI Rongfeng, RUAN Feng, QIU Huaxing, FAN Qixiang, WANG Quan. Residual Austenite of Different Cold Working Die Steels after the Typical Heat Treatment and Its Influence on Impact Toughness and Dimensional Stability[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2021, 57(10): 1-5,11. DOI: 10.11973/lhjy-wl202110001 |
[3] | WAN Zhijian, JIANG Bo, CHEN Gang, ZHAO Hai, ZOU Qiang. Effect of V Element and Heat Treatment Process on Microstructure and Properties of High Carban Microalloyed Steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2019, 55(12): 830-835,872. DOI: 10.11973/lhjy-wl201912003 |
[4] | SONG Wen-qiang, LI Shang-lin. Effect of Heat Treatment Process on Microstructure and Mechanical Properties of 12Cr1MoV Steel[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2017, 53(2): 97-100. DOI: 10.11973/lhjy-wl201702005 |
[5] | YAN Yang-yang, YAO Yong-hong, LI Hong-li. Relation between Proeutectoid Ferrite and Heat Treatment[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2014, 50(7): 468-471. |
[6] | ZHANG Xian, MU Qing-hong. APPLICATION OF MR-20 SIMULATE HEAT-TREATING FURNACE[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2008, 44(4): 198-199. |
[7] | DONG Jia-kun. HEAT TREATMENT PROCESS CHARACTERISTIC ON AIR-CONDITION SCREW[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2008, 44(3): 123-125. |
[8] | YU Zhao-bin, SHI Ju-yuan. EFFECT OF HEAT TREATMENT CONDITION ON CRACK TOUGHNESS AND CRACK PROPAGATION RATE OF 2.25Cr1Mo STEEL[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2007, 43(10): 490-493. |
[9] | GAO Yan-juan, WANG Chao-zhi. FAILURE ANALYSIS ON SPECIAL HEAT TREATMENT HOOK[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2007, 43(7): 361-363. |
[10] | ZHU Zong-Yuan, CUI Kun. THE PRESENT CONDITION AND DEVELOPING DIRECTION OF DIE STEELS,HEAT TREATMENT PROCESSES AND STANDARDS IN CHINA[J]. PHYSICAL TESTING AND CHEMICAL ANALYSIS PART A:PHYSICAL TESTING, 2007, 43(2): 84-88. |