Advanced Search

    column
    The influence and control of non-metallic inclusions in bearing steel
    YANG Yubo, WANG Shanshan, JIANG Jingxuan, CAO Guojin, BAI Song
    2025, 61(6): 1-5. DOI: 10.11973/lhjy-wl240133
    Abstract PDF
    The effect of simulated post weld heat treatment on the microstructure and mechanical properties of Cr-Mo steel for pressure equipment
    LI Jinmei, ZHANG Jianxiao, E Xin, LIU Limei, SHI Wei, JIANG Chunhong
    2025, 61(6): 6-9. DOI: 10.11973/lhjy-wl240108
    Abstract PDF
    Factors affecting the results of hole expansion test for DP600 hot-rolled dual phase steel
    LIU Minghui, LIU Buting, XIANG Qian, XIANG Weihua, YU Yuan
    2025, 61(6): 10-12. DOI: 10.11973/lhjy-wl240233
    Abstract PDF
    Loosening mechanism and influencing factors of fastening connections based on lateral vibration conditions
    GAO Xuemin, SHI Dapeng, ZHANG Zipeng, HAO Yinfeng, WANG Yamei, GUO Chaoyue
    2025, 61(6): 13-19. DOI: 10.11973/lhjy-wl240356
    Abstract PDF
    Factors affecting low cycle fatigue life of 321 and 321H austenitic stainless steel
    ZHANG Yugang, HE Guoqiu, LIN Yuan
    2025, 61(6): 20-25. DOI: 10.11973/lhjy-wl240132
    Abstract PDF
    Automatic detection of conductivity value in degreasing solution for hot-dip galvanizing
    LIU Buting, GUO Yan, LIU Minghui, TAO Yong, YU Yaoguo
    2025, 61(6): 26-30. DOI: 10.11973/lhjy-wl240171
    Abstract PDF
    Differences in the latest commonly used Vickers hardness test standards at home and abroad
    ZHAI Lianna, WANG Bin
    2025, 61(6): 31-35. DOI: 10.11973/lhjy-wl250028
    Abstract PDF
    Reason for cracking of fillet weld in a certain gas storage tank
    ZHANG Congmin
    2025, 61(6): 36-40. DOI: 10.11973/lhjy-wl240115
    Abstract PDF
    Reason for the fracture of the motor shaft of a certain centrifugal fan
    YUAN Xiaodong, LI Zhihao, CHEN Jieming, GUO Haixia, LIU Pan, ZHANG Xinyao
    2025, 61(6): 41-44. DOI: 10.11973/lhjy-wl240344
    Abstract PDF
    Reason for M50 bolt fracture
    GAI Yuehua, FENG Bingquan, LI Zhaohui
    2025, 61(6): 45-50. DOI: 10.11973/lhjy-wl250060
    Abstract PDF
    Reasons for cracking of the pressure supply pipe of the safety valve in the aircraft hydraulic system
    TIAN Hao, FU Guoru, CHEN Rong, LI Quan
    2025, 61(6): 51-54. DOI: 10.11973/lhjy-wl240128
    Abstract PDF
    Reasons for cracking in automotive sheet stamping for ultra deep drawing
    LI Ying, LIU Xiangming, LIU Jia
    2025, 61(6): 55-59. DOI: 10.11973/lhjy-wl250076
    Abstract PDF
    Reasons for deterioration of 0Cr18Ni9 steel in the center cylinder rib plate of sulfuric acid converter
    DUAN Pan, DENG Ming, LIU Hua, GE Yunfei, LIU Lingbo
    2025, 61(6): 60-64. DOI: 10.11973/lhjy-wl250002
    Abstract PDF
    Reasons for the fracture of Z40CSD10 steel exhaust valve in marine engine
    HUANG Chi, ZHOU Jun, BAO Haiyan
    2025, 61(6): 65-69. DOI: 10.11973/lhjy-wl250051
    Abstract PDF
    Reasons for cracking of starch centrifuge drum
    LI Yang, ZHANG Jibin, WANG Jiankang, SUN Jianyu, XIAO Shengxin, LI Gen
    2025, 61(6): 70-73. DOI: 10.11973/lhjy-wl240145
    Abstract PDF
    Reasons for the fracture of 25Cr2MoVA steel bolts in a 330 MW supercritical steam turbine unit of a thermal power plant
    LI Ling, ZHANG Bin, LI Weili
    2025, 61(6): 74-79. DOI: 10.11973/lhjy-wl240116
    Abstract PDF
    Reason of crack with mounting shaft of ultra-high strength steel
    WANG Bo, YANG Xiaomin, LI Bo
    2025, 61(6): 80-84. DOI: 10.11973/lhjy-wl240100
    Abstract PDF