高级检索

    高速电弧喷涂Zn-Al和Zn-Al-Mg-RE涂层在模拟海洋环境中的耐腐蚀性能

    Corrosion Resistance of High-speed Arc Sprayed Zn-Al and Zn-Al-Mg-RE Coatings in Simulated Marine Enviorment

    • 摘要: 采用高速电弧喷涂技术在Q235钢表面制备了Zn-Al和Zn-Al-Mg-RE涂层,通过全浸泡试验、阻抗谱、动电位极化分析了Zn-Al和Zn-Al-Mg-RE涂层在模拟海洋环境中的耐腐蚀性能。结果表明: 在质量分数为3.5%的NaCl溶液中,Zn-Al和Zn-Al-Mg-RE涂层具有良好的耐腐蚀性能,且Zn-Al-Mg-RE涂层的耐腐蚀性能优于Zn-Al涂层; Zn-Al-Mg-RE涂层中的稀土元素增加了涂层腐蚀时产生的钝化膜的致密性,阻碍涂层被腐蚀介质腐蚀。

       

      Abstract: Zn-Al and Zn-Al-Mg-RE coatings were prepared by high-speed arc spraying technology on the surface of Q235 steel. And the corrosion resistance of the coatings in simulated marin enviorment was analyzed by full immersion test, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. The results show that both Zn-Al and Zn-Al-Mg-RE coatings had a good corrosion resistance in 3.5% NaCl solution and the latter’s corrosion resistance was better than that of the the former’s. The compactness of passivation film caused by the coating corrosion was increased by the rare earth elements of the Zn-Al-Mg-RE coating, and the coating was protected by the passivation film.

       

    /

    返回文章
    返回